Bathware Testing Instruments

The Presto CASS Tester has been designed strictly as per the relevant standard to assess the ability of rust proofed components to withstand corrosion due to atmospheric conditions. It is Triple Walled (with glass wool insulation).

Box Compression Tester is a consistent tool to indicate the Compression strength of cardboard boxes so that it does not get deformed or crushed when stacked one above the other during storage or transit.
Registered Design Patent No. 279106

The force required for bursting or complete rupture of the board is measured through a Digital Indicator. The bursting strength defines the material's quality as compared to the others. Bursting Strength Tester Genie 2.0 provides a hydraulic...
Registered Design Patent No. 279109

Presto coating thickness gauge is the perfect instrument to use measure the expected life of coating. Widely used in paints and dry coating, it measures the dry film thickness very efficiently. Dry coating measurement is a very crucial prospect as it defines a lot about the process, cost and quality. Apart from that, the performance can be estimated in different working environments. It is a non-destruction form of testing and can be used for on-site inspection.

It is one of the best product to measure the coating thickness measurement of ferrous and non-ferrous coatings. Designed ergonomically to use in on-site inspection, its portable nature makes it easy to use. It has a bright LCD display for easy reading. The machine has very simple operation and does not require special skills to operate the instrument. It is used to determine the quality and life expectancy of the thickness coating.

Coating thickness gauge is widely used in measuring the coating of the surface. Used widely in metal industries, it can be efficiently used to measure the non-conductive coating over a non-ferrous surface. To protect the metal surfaces from corrosion, they are often coated with paint or metallic coating. To estimate the life and quality, coating thickness measurement in often done. Using a digital gauge eases the process and does not require special skill for this.

Drop tester is the perfect machine to test the drop strength of the corrugated cartons. It is equipped with a wired remote-control mechanism to eliminate the human interference. The test specimen is observed visually after it is made to fall from a certain height. The instrument work with pneumatic application and used in almost every industry that deals with corrugated cartons.

Hot Air Oven is a unique test cabinet designed to detect the change in the physical characteristics of the material and to ascertain the actual working life of testing device at elevated temperature. Works on Forced air circulation, thermal convection principle, suitable for Tests like heat deformation, compression set, heat resistance required in rubber and plastic industries.

For tests on coatings for crack formation; breaking off; adhesion and elasticity. A bulge is formed in the sheet metal by a falling weight with a hemispherical end. The coating can be on the outside or on the inside of the bulge.

Useful for checking resistance to impact surface damage and penetration for construction materials viz plastic, resin, fibreglass, sheet metal and plywood.

The Presto Ultra Low Temperature Deep Freezer is equipped with an air cooled compressor and CFC free refrigerators. These systems are installed to provide efficient cooling and consistent flow in the cabinet.