Paint, Plating & Coating Testing Instruments

Salt spray test chambers or cyclic test chambers are widely used in the automotive and metal products manufacturing industry to conduct the corrosion resistance test of the surface coatings. This quality assurance test will be used to determine whether the product will survive for a longer time when exposed to corrosive conditions or not. Thus, to make it easy for the manufacturers of the paint, plating, and coating industry to determine the corrosion resistance properties of their surface coatings, we at Presto have designed this highly advanced Cyclic Test Chamber.

Humidity Chamber - Touch Screen with Data Logger is used for assessing the change in physical properties of the materials when there is a severe change in the environmental conditions like humidity. The machine is equipped with advanced touch screen panel and upgraded features. It comes with 3 coloured tower style alarm to alert the operator.

The PRESTO Water Bath Digital (Rectangular - Double Walled, Stainless Steel) is a digital equipment, wherein both the inside and outside are made of high-grade corrosion resistant Stainless steel. It is used to incubate samples in hot water at high temperatures required in textile and microbiology industries.

The Ford Cup from Presto Stantest is easy to use. It is a flow-cup viscometer. It shows how smoothly liquids like paints, inks, varnishes, and solvents move. It gives a quick idea of a liquid’s thickness. Labs and production teams use it to keep every batch consistent. Manufacturers check that liquids are not too thick or too thin. This helps them spread and apply just right in real-life use.

The gloss meter is available in different geometries to measure the specular reflection gloss of a surface or a material. The Gloss Meter Tri-angle is used to determine the gloss on a surface and measures the amount of reflected light.

For tests on coatings for crack formation; breaking off; adhesion and elasticity. A bulge is formed in the sheet metal by a falling weight with a hemispherical end. The coating can be on the outside or on the inside of the bulge.

A Multihatch Gauge, often called a Cross Cutting Rule, helps with that simple yet important check. It carries 11 grid lines with a line length of 35 millimetres. It provides multiple spacing options of 1mm, 2mm, 1.5 mm and 3 mm. 

Polymer products usually damage when exposed to various environmental conditions which are formed from the atmosphere. This directly affects the actual life of the product. Hence, it is necessary to test the quality of the polymers to calculate...

Vibration simulation is an efficient and cost-effective way of determining damage caused by the repetitive movement in the vehicles. In just a few hours we can pinpoint potential damage areas in your package or product caused by vibration.

Our Vibration Table is customizable. You can get a Digital, Computerised, or touchscreen Vibration table according to your sample testing needs! Be it swivel, synchronous, or asynchronous, test your sample to its fullest to ensure durability, long life, and zero rejections.

Availability: In stock

The Presto muffle furnace is used to determine the ash content of a specimen. The percentage of ash in a material gives important insights into the properties of the substance. The Presto muffle furnace is specially designed as per IS & ASTM Standards.

Polymer materials are usually get damaged due to the natural environmental factors which form due to the atmosphere and earth's surface when it is used for years outdoor which directly affect the life of the products.

The Cross Hatch Tester is a device that evaluates the adhesion strength. It examines the adhesion power of paints, coatings or any other treatments applied to surfaces ( like wood, plastic or metal).

A quick cut pattern( a crosshatch pattern) is made on the coated sample, and tape is applied. The adhesion strength becomes clear from how much coating stays in place. It is a fast and trusted method to evaluate coating quality in factories, automotive units, appliance plants, and various finishing lines.

Cross-Hatch Tester Complies with ASTM D 3359, BS EN 2409: 2013, DIN EN 2409: 2013-6, ISO 2409: 2013