Model PFT-IS 15061
Flammability testing determines how easily a material or finished product will ignite or burn when exposed to or used near fire or heat.
Flammability testing covers several different testing protocols and methods intended to measure a material's vulnerability, including its susceptibility to an ignition source, its propensity to combust, and the rate at which it will burn when ignited.
The Tester is based on IS 15061, The standard is applicable to check the burning behavior (ignitability, burning rate and melting behaviour) of interior materials used in motor vehicles.
Flammability test methods measure how easily materials ignite, how fastly they burn and in which manner they react when burned. During the test, samples are exposed or, held in a vertical/horizontal position, to a flame and determining the speed of propagation of the flame over the material to be tested.
Technical Specification's-
For Horizontal Test
Sample holder |
SS material U shaped |
Diameter of Sample support wires |
0.25 mm |
Inner Diameter of gas burner |
9.5 +/- 0.5 mm |
Test Gas |
Natural Gas having calorific value near 38 MJ/m3 |
Sample Size |
300 * 50 mm |
Test fixture Dimension |
360 *100 mm |
Inner size |
384 *204*361 mm |
Flame height |
38 mm |
Material of Construction |
SS |
Burner Preheat time |
Atleast 1 min |
For Vertical Test
Sample holder |
SS material rectangular frame |
Inner Diameter of gas burner |
Aprrox. 1.7 mm |
Test Gas |
Commercial propane or butane gas |
Sample Size |
560 * 170 mm |
Test fixture Dimension |
560 *200 mm |
Inner size |
384 *204*361 mm |
Flame height |
40 +/- 2 mm |
Material of Construction |
SS |
Burner Inclination angle |
30 degree |
Burner Preheat time |
2 min |
What our customers say about us is important to us.
Heat Deformation - HDT/VSP Tester is a consistent tool useful for determining the ability of a given polymer to bear load at elevated temperatures. Accurate and reliable deflection or deformation is an important component in the plastics industry.
TP310 is a prominent color measurement instruments used in many mainstream industries which have been designed and manufactured by competent engineers and scientists of Presto Stantest. The instrument has many advantages of other international standard color measurement instruments.
Presto Melt Flow Index Tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter.
The Presto Melt Flow Index Tester - NXG Model is a reliable instrument used for evaluating and analyzing the flow properties of molten plastics or resins. The determination of the melt flow index of plastic materials is an important parameter in the evaluation of its quality.