Model PCT-100 (C) (Wintest)
RCT/FCT/Edge Crush Tester is a consistent tool to measure the crush strength of cardboard boxes and packaging containers. RCT/FCT/Edge Crush Tester reveals the crushing resistance in unit Kg/Unit length. It is a rigid support type compression tester designed to perform TAPPI & ASTM material tests on corrugated board & paper. It is suitable to perform Ring Crush (RCT), Edge Crush (ECT) & Flat Crush (FCT) as per standards. It is a table top model.
It comes with Dual System viz.
1) Digital Display (Incase computer is not used/available)
2) Inbuilt hardware & software CD.
Load Cell Capacity | 100 Kgf |
Display | LED (Digital) |
Accuracy | ±2% at full load (with master load) |
Least Count/Resolution | 0.01 Kgf |
Power | 220V, Single phase, 50 Hz |
Test Speed | 12.5± 2.5 mm/min |
Highlights :
Safety Switch | Upward & Downward Limit Switches |
Material | Mild Steel |
Finish | Powder coated Havel Gray & Blue combination finish and bright chrome / zinc plating for corrosion resistant finish |
Dimensions | 600x500x863 mm |
What our customers say about us is important to us.
Heat Deformation - HDT/VSP Tester is a consistent tool useful for determining the ability of a given polymer to bear load at elevated temperatures. Accurate and reliable deflection or deformation is an important component in the plastics industry.
TP310 is a prominent color measurement instruments used in many mainstream industries which have been designed and manufactured by competent engineers and scientists of Presto Stantest. The instrument has many advantages of other international standard color measurement instruments.
Presto Melt Flow Index Tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter.
The Presto Melt Flow Index Tester - NXG Model is a reliable instrument used for evaluating and analyzing the flow properties of molten plastics or resins. The determination of the melt flow index of plastic materials is an important parameter in the evaluation of its quality.