Model PCS
Crease Stiffness Tester is a multi-function stiffness tester, mainly used for measuring cardboard, color box (such as cigarette case cosmetic box) of the indentation force (that is, 90° crease of the rebound force), can also measure a variety of cardboard Bending stiffness is achieved on the same instrument with two measurements: 15° flexing Degrees and 90° crease stiffness.
Standards: • BS 6965-Part-1-1988 • BS 3748, • PMI 068 • BS ISO 2493:1 • TAPPI T556 (15 ° Only) • SCAN P29
Key Specification :
Capacity |
5000 gm |
Display |
7 Segment LED (Digital) |
Specimen Clamping |
Strong gripper zero slippage |
Accuracy |
± 2% |
Least Count/Resolution |
1 gm (Optional 0.1 gm and 0.01 gm) |
Load Sensor |
2 millivolt / Volt |
Power |
220V, Single phase, 50 Hz AC |
Sample Cutting Die and Punch |
Yes |
Main line fuse protection |
Yes |
Bending Angle |
90 Degree |
Stiffness Angle |
15 Degree |
Features:
• Two independent test modes: 15° stiffness test and 90° crease force test.
• 7 segment digital display of measured force in grams.
• Mechatronics modern design concept, compact structure, elegant appearance, easy maintenance.
• Overload protection (Preset).
• Peak force value.
• Basic ease of use.
• Measuring range: 0 - 5000 grams.
• Accuracy ±2% of reading.
• Test time 15 seconds
Heat Deformation - HDT/VSP Tester is a consistent tool useful for determining the ability of a given polymer to bear load at elevated temperatures. Accurate and reliable deflection or deformation is an important component in the plastics industry.
TP310 is a prominent color measurement instruments used in many mainstream industries which have been designed and manufactured by competent engineers and scientists of Presto Stantest. The instrument has many advantages of other international standard color measurement instruments.
Presto Melt Flow Index Tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter.
The Presto Melt Flow Index Tester - NXG Model is a reliable instrument used for evaluating and analyzing the flow properties of molten plastics or resins. The determination of the melt flow index of plastic materials is an important parameter in the evaluation of its quality.