springs-testing-equipments
Tensile Testing Machine Digital
The Tensile testing Machine is highly recommended for evaluating the tensile strength of products and materials. The equipment is based on the Constant Rate of Traverse (CRT) principle. It is equipped with an upper jaw and a lower jaw. Universal Tensile Testing Machine is a reliable piece of equipment which is widely used for checking tensile strength of a product/sample. One of the most common mechanical testing techniques used to determine tensile strength, this is a method wherein controlled tension is applied to a sample until it fully fails.
Thus, the material properties of the sample can be easily determined by this test. It involves measuring the force required to elongate a sample under test to breaking point. Using this test, manufacturers and quality managers are able to determine the core strength of their products.
Registered Design Patent No. 252611
Salt Spray Chamber (Corrosion Tester) - Patent No. 244580
Salt Spray Chamber is made as per ASTM B117 and JIS 2371 which is used for conducting Neutral Salt Spray Test or NSS test on Meta Surface Coatings. It is used for checking the resistance of the coating towards corrosive environment. The Salt Spray Tester generates an accelerated form of Salt laden environment inside which the specimen are tested for its quality.
Our Salt Spray Chambers come with three different types of specimen-holding fixtures. Those are as follows:
- Panel-type sample holding fixtures
- FRP hanging rods holding fixtures for thick samples
- V-Grooved tray for Fasteners
Download E-Book
Registered Design Patent No. 244580
.jpeg)
.jpeg)
Cyclic Corrosion Salt Spray Chamber
Presto Cyclic Corrosion Salt Spray Chamber – Worlds most Interactive and versatile corrosion test systems range available, synthesizing salt spray with other environmental conditions such as controlled humidity, ambient drying, air drying, dwell cycle and wetting / condensation.
springs-testing-equipments
