plastic-rope-testing-equipments

TP310 is a prominent color measurement instruments used in many mainstream industries which have been designed and manufactured by competent engineers and scientists of Testronix. The instrument has many advantages of other international standard color measurement instruments.

Presto Melt Flow Index Tester is used for evaluating the flow properties of molten plastics or resins. The Melt flow Index of thermoplastic materials is defined as the rate of flow (in grams per ten minutes) of extrudates of molten resins through a jet of a particular length and diameter.

The Presto Melt Flow Index Tester - NXG Model is a reliable instrument used for evaluating and analyzing the flow properties of molten plastics or resins. The determination of the melt flow index of plastic materials is an important parameter in the evaluation of its quality.

The Tensile testing Machine is highly recommended for evaluating the tensile strength of products and materials. The equipment is based on the Constant Rate of Traverse (CRT) principle. It is equipped with an upper jaw and a lower jaw.
Registered Design Patent No. 252611

The Presto Color Matching Cabinet Spectrum Asia II is one of the widely used lab testing instrument in the industries and laboratories where it is important to maintain the color consistency of the products. This color matching machine will provide accurate assessment of colors under standardized environment for evaluation and visual assessment of colors.

Presto's Muffle Furnace - HMI Prima series is used to measure the percentage of ash content in a particular specimen. The percentage of the ash in a sample offers vital insights into the properties of the material.

The Farbung TP110 is a highly used and preferred color measurement instruments in many industries. There are several new features that are added to the product by the highly competent team of engineers and scientists of Testronix.

The Presto muffle furnace is used to determine the ash content of a specimen. The percentage of ash in a material gives important insights into the properties of the substance. The Presto muffle furnace is specially designed as per IS & ASTM Standards.

The MB95?s halogen heating system distributes heat uniformly over the sample and speeds up the drying process ? delivering fast and precise measurements.

Hot Air Oven is a unique test cabinet designed to detect the change in the physical characteristics of the material and to ascertain the actual working life of testing device at elevated temperature. Works on Forced air circulation, thermal convection principle, suitable for Tests like heat deformation, compression set, heat resistance required in rubber and plastic industries.

The coefficient of Friction Tester - Digital Cum Computerised is a consistent tool to indicate the starting and sliding friction of plastic films and sheets when sliding over itself or other substance at specified test condition.

The Digital GSM balance is one of the highly effective and accurate laboratory testing equipment that is used to measure the weight of materials including paper, paperboard, solid fiberboards and corrugated boxes. This paper gsm checking machine ensures that users can get precise testing results for testing the grammage of products.

Identifying the strength and durability of materials is of utmost importance to make sure that quality products will be delivered to the customers. Thus, if you are looking for a highly accurate lab testing instrument to identify the sturdiness of materials under sudden falling force or impact, then you must go with Presto Izod / Charpy Impact Tester Computerized model.

One of the most essential factors, plastic container manufacturers keep in mind while designing their products is that their products should be intact and free of any vacuum leaks. Testing their products against vacuum leaks will also help them to ensure the leak integrity of their products. A small leak present in the product would lead to problems. Therefore, we at Presto have designed one of the highly advanced lab testing instruments known as the vacuum leak tester for the plastic container-prima series.

The new-design MFR Model can quickly extrude the flow rate of molten resins utilizing the advanced setup of load, piston, and a metallic barrel. The specimen, majorly in granule form is put inside the barrel and the piston is inserted. Loads, as per requirement are placed on the piston and the parameters are then selected from the touchscreen display.

The melt flow rate of the polymers is one of the essential properties of the materials that will help the manufacturers in determining the rate at which it flows. This property of the material is important as it provides the necessary data on the mass flow rate of the polymer. Thus, to test the melt flow properties of the materials, we at Presto have recently designed a high-quality Melt Flow Index Junior model.

The IZOD/Charpy Impact Tester is a reliable and consistent testing instrument that is used for measuring the impact resistance of materials under sudden falling force or impact. Presto has designed a high-quality IZOD/Charpy Impact Tester NXG model that will easily reveal the impact strength of plastics and other related materials.